The use of oil for filling machine maintenance requires attention to detail

Nowadays, the country is constantly advocating energy conservation, environmental protection, and low-carbon living, so saving has been put on people's agenda. For the filling machine industry, the maintenance of filling machines is also receiving increasing attention. When it comes to maintenance, the first thing to think of is the filling machine maintenance oil. The maintenance oil for filling machines is very particular, unlike our usual door lock or bicycle lubricating oil, which can be replaced by our regular edible oil. Here, let Jiuhua Filling Machine take you through a brief understanding.

After discovering that some customers have replaced their systems with new oil, they can rest assured. In fact, new oil does not equal clean oil. Therefore, everyone should establish the concept that new oil is "dirty oil". If more than 10% of new oil is injected into the tank, the flushing plate should be replaced, the oil source should be started, cleaned for more than 24 hours, then the oil filter should be replaced or cleaned, and the flushing plate should be removed and the servo valve replaced.

In general, hydraulic oil that has been continuously used through a filter for a long time is often relatively clean. Therefore, in the absence of leakage in the system, unnecessary refueling should be reduced to avoid further contamination of the system. This is a small trick for filling machine maintenance, please do not hesitate, so that you can maintain your beloved machine well in the past.