| |
半自动酒水灌装生产线
主要由刷瓶机、链轨式冲瓶机、灌装机、输瓶机、封盖机、胶带、封箱机等单机组成，可根据用户的不同需求进行组合安装。主要用于酒、水灌装生产线的流水作业，适用于各种异型瓶。
生产能力：1500-2000瓶/小时（封口机除外）。
Half-Automatic filling production line
lt mainly is made of the brushing bottle machine、washing bottle machine、filling bottle machine、sealing machine、tape sealing machine.Under the requirements of customers is for installation. Lt is mainly used for wine,watre filling production line and appli-able to all bottles.capacity:1500-2000b/h(except sealing machine).
|
简易刷瓶机
由毛刷转动机构与浸泡池组成，主要用于新、旧瓶的浸泡和内刷。
Brushing bottle machine
It is made of brush and soaking pool.lt is used mainly for new and old bottle of immersion and brushing
|
QSP-4000型 链轨式冲瓶机
广泛用于酒厂、饮料厂、酿造厂、制药厂等各行业各种瓶型的冲洗。该机结构新颖，操作简单，工作可靠，采用人工上、下瓶，自动内冲、外淋的冲瓶机械，冲瓶干净，能耗低。外露部分及与液体接触部分，均用不锈钢制造，符合食品卫生标准。
QSP-4600 washing bottle machine
It is widely used in the distillery and beverage plants,brewing p-lants,pharmaceutical plants and other industries to wash the bottles.the machine is novel structure,simple operation, working reliable and artificial bottling, automatic washing. Lt washs are stainless steel manufacture, whhich meet food hygiene standards.
|
GCP-12万能灌装机
生产能力1500-2000b/h（500ml时）一般用于不含气的液体定量灌装，定量范围一般在150-750毫升内作任意的调整，标准容量为500 ml时，平均误差±3ml，该机上部的储藏罐内液面高度稳定，是保证灌装精度的关键。
GSP-12 universal filling machine
Capacicty:1500-2000b/h(500ml)is generally used for non-gas liquids Filling.Filling scope:150-750mml.when volume dosing is 500ml,average error is ±3ml.The machine on the top of the storage irrigation fluid level stability is the guarantee the accuracy of filling key.
|
质检灯
主要用于检验透明瓶封装的透明液体的悬浮物，是液体包装生产线的必备设备。
Quality Test
It is used to test the bottle of liquid impurities,lt is equipment necessary of liquid packaging production line.
|
TY-1型 防盗盖封口机
主要用于扭断式铝制瓶盖的封边和塑料瓶盖的旋合（更换压头边）。封头结构采用四爪平衡式封盖原理，用力均匀，设有瓶口自动定位装置，克服了由瓶底定位的多种弊端。可单机使用，又可安装在输瓶线上与其它机器配套使用。
生产能力：1200瓶/小时
TY-4sealing machine
It is mainly used for deging the closures of alumiunm and screwing the cl-osures of plastic.Sealing structure uses four claw-balance principle of ca-pping,exertion unifom,with the mouth of the bottle automatic position-ing device,overcome a variety of drawbacks by positioning the bottom of bottle.lt can be used alone.lt able to be installed on the bottle line with ot-her machines using.
Capacity:1200b/h
|
输瓶机
主要由不锈钢直输平顶链和动力头组成，可输送各种瓶型，运行平稳，工作可靠。输瓶机可安装护栏，也可安装工作台，即保证瓶子平稳输送，又可在工作台上进行贴标、装箱等其他工作。输瓶机的调速方式：电磁调速、变频调速、行星锥攀无级调速、皮带轮调速四种。（用户可根据要求选择）。
线速度：3-12米/分钟
Transportation bottle machine
It has stainless stell chain and dynamic head,which can transport all ki-nds of bottle.Transportation bottle machine can install barriers and install working platform,lt can guarantee a smooth transmission bottle ,the wo-magnetic speed、Frequency speed、Puller speed.
Line speeed:3-12m/m
|
烘干机
主要用于将灌装完毕后瓶子外部的水珠打碎后将水膜进行烘干。亦可用于粘贴浆糊纸标后的烘干。该机由毛刷机组和热风机隧道组成，需要装在输瓶线上使用，当瓶子经输瓶线传递过来后，先通过毛刷组，将瓶子上的水珠打碎，然后再进入热风隧道，将瓶子表面残留的少量水膜经热风吹干，为贴不干胶商标做好准备。
特点：热风机组采用电加热原理，用高压风机吹干，热风经送风系统循环使用，热损失少，节能效果显著。
Drying machine
It is mainly used for drying filling-bottles.lt can also be used for drying the labeled bottle.The brush and hot air tunne are com-ponent of the machine.Whe the bottle? was passed it,the first,the bottle is brushed with brush,and then enter hot air tunnel.the surface of water is drying.specification Hot-air machine u-se electric heating principle.High-pressure blower dring,hot air supply system was recycled,less heat loss.saving effect is remarkable.
|
FJS-500型胶带封箱机
主要采用即贴胶带对纸箱封口，经济快速、容易调整，可一次完成上、下封箱动作。
使用箱宽：150-500mm
使用箱高：125-600mm
封箱速度：20箱/分钟
FX-500 tape Sealing machine
It is mainly used for tape sealed,economical.lt is easy to adjust,once completed sealing.
Width: 150-500mm
Height: 125-600mm
Speed:20b/m
|
